HV DOWN LITE
HV DOWN LITE
Product benefits:
High-voltage LED light
Dimmable with L/C type phase or reverse phase dimmers (home installation dimmers)
Product characteristics:
Extremely high light output in relation to size
Recessed light with 68 mm installed diameter
Application:
Large shelving units and display cabinets
Ceiling lighting
| Article | Warm White | Neutral White |
| Individual light – mini HV plug-in system | 32 238 16 | 32 238 06 |
| Individual light – wire end ferrules | 32 238 11 | 32 238 01 |
| Lamp type: | LED recessed light |
| Type of lighting: | Functional lighting |
| Surface finish: | Stainless steel / Aluminium look / White |
| Operating voltage: | 230-240V AC |
| Light colour: | Warm white / Neutral white |
| Colour rendering index CRI: | > 80 |
| Energy efficiency: | A+ 64 lm / W |
| Life span: | 30,000 h (L70) |
| Power consumption: | max.5,5W |
| Dimmable: | Yes (see ordering information) |
| Beam angle: | 60° |
| Test marks and symbols: | c 3 MM |
| Supply lead: | 2000 mm |
| Installed diameter: | 68mm |
| Protection rating: | IP 44 (mounted) |
| Plug connection: | HV connector mHV2 / ADE |
- Version with wire end ferrules must be installed by a qualified electrician
- Individual lights are supplied without cover ring
- Sales unit: 1
Tips & tricks.
Using lux and lumen values to select the right product
If you are searching for functional lighting with a certain level of illumination, you can easily see whether a product has the correct degree of brightness by reading the lux values on the lighting diagram. This also allows you to compare different lights. The luminous flux or light output of a lamp does not provide any information on the level of illumination. It is suitable only for selecting lights for systems where lamps are replaceable, which is for instance the case with T5 LiteLine lights
Extending LED supply leads
Supply leads cannot be infinitely extended. Firstly, unwanted EMC effects might occur (causing interference with electronic systems); secondly, ballasts might be overloaded or the light output of the lamp might be significantly reduced.
Our lights based on 12 V DC
are supplied with a mini M1 LED plug and may be generally extended by 2 extension leads of 1.8 m each in addition to the fitted supply lead.
Our lights based on 24 V DC
are supplied with a MP2 multi-plug and may be generally extended by 2 extension leads of 1.8 m each in addition to the fitted supply lead.
